top of page

Tansa turnstile slave or master single wing LTOP501

Used in spaces like the banks or corporate headquarters where aesthetic excellence is a priority to impress the visitors. The architects and interior designers have many options to customize this model and create a rich and opulent look. Among the decorative materials that can be used to transform this model into a visual masterpiece are marble and granite as well as leather and all kinds of wood finish including wallnut, oak, and olive. Operation LTOP 501 optical turnstiles form a corridor.

In the middle of this corridor, there’s a wing obstacle made up of glass or plexiglass. When the visitors have their cards read by the card reader, the wing opens. While the visitors are passing through the gate, if another person wants to take advantage of the open turnstile and tailgate behind the first visitor, the obstacle closes and blocks the passage immediately and sets off the alarm.However, if the sudden closure of the wing has the potential to harm an individual, it does not close but the alarm continues to alert the security. In contrast, LTOP 501 has the obstacle moving in and out in a straight linear fashion, thus providing a more reliable access control system.




Controlled or control-free entrance / exit in both directions



AISI 304 quality stainless steel. Optional: Black stainless steel.



10 mm tempered glass that can open in either direction.
Optional: Smoke colored glass.


Upper table:

10 mm black tempered glass.



It works bidirectionally and allows the passage of a single person with only its microprocessor control, an electronic passage memory feature saves in memory card swipes that occur before a passage is completed and allows them to pass without closing the wings. Optional: 2 x RS232 and 1 x RS485 communication ports.



Wings are operated by means of a servomotor. Precision motor movement with 16 bit microcontroller and encoder support, and motor-locking in the event of unauthorized passes.



14 reciprocal sensors in every turnstile.


Emergency mode:

Turnstile switches to emergency mode upon receipt of a signal from the fire detection system and wings open in pre-defined direction.


Safety level settings:

With 4 security levels that can be defined as desired by the customer, turnstile is able to detect unauthorized passes and passes in the opposite direction and emits an audio or discreet warning.



Led lighting around the top plate and transition led.


Operating voltage:

100-230 VAC. 47-60 Hz


Power consumption:

20W during passage, 8W during standby (for two wings).


Operating temperature:

0° / +55°


Passage speed:

~60 persons / minute.


Wing speed:

0.6 sec (Opening – Closing).


Passage width:

55 cm



~105 kg (Single wing)


Security level:



Areas for use:

Suitable for indoor use.



Logo engraving. Sticker. Remote control unit. Stainless steel reader apparatus. Meter. Button control unit. Stainless steel reader leg. Stainless steel bottom plate.

Tansa turnstile slave or Master single wing LTOP501

Rating is 0.0 out of five stars based on reviews

    Related Products