D-Link Wireless N PoE Access Point DAP-2360, 300Mbps wireless performance and versatility to deploy into various scenarios.
Supports up to 8 SSIDs per Band that can logically divide the access point into several virtual access points all within a single hardware platform.
The DAP-2360 uses a high-powered single radio design to reduce dead spots and increase capacity, allowing network administrators to deploy highly manageable and extremely robust wireless networks.
The DAP-2360 has a wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saving power and increasing network security.
 
Specifications
Type: Software Managed AP
Wireless Standard: Wireless N
Frequency band mode: Single-band
Antenna type: 2 detachable omni-directional antennas
Antenna gain: 5 dBi for 2.4 GHz
Power-over-Ethernet: Yes
Wired Interface: 1 x Gigabit Ethernet LAN
Indoor/outdoor: Indoor
Type of housing: Metal
Plenum rated (UL-2043): Yes
Wireless Mode: Access Point (AP)
WDS bridge
WDS with AP
Wireless client
Advanced features: 802.11k/r Roaming
MIMO
Maximum number of SSIDs: 8
Auto channel selection: Yes
WMM-PS/802.11e (U-APSD): Yes
Wi-Fi scheduler: Yes
AP traffic load balance: Yes
L2 roaming: Yes
WEP 64/128 bit: Yes
WPA/WPA2-Personal/Enterprise: Yes
TKIP/AES encryption: Yes
WPA_WPA2_PSK over WDS: Yes
WLAN partition: Yes
SSID broadcast disabled: Yes
Rogue AP detection: Yes
Station isolation: Yes
MAC address filtering: Yes
802.1X authentication: Yes
DHCP server: Yes
802.1D STP: Yes
IGMP snooping: Yes
ARP spoofing: Yes
NTP: Yes
IPv6: Yes
Management platform: Nuclias Connect
WEB: Yes
SNMP (v1, v2c, v3): Yes
CLI: Yes
Telnet: Yes
SSH: Yes
Syslog: Yes
Central management (through AP Manager II and/or D-View Wireless Control Module): Yes