Cisco CBS350-48P-4X 48 Port Gigabit (48 POE - 375W) 4X10GE SFP Managed Stackable Switch
Specifications:
Capacity in Millions of Packets per Second (mpps) (64-byte packets): 130.94
Switching Capacity in Gigabits per Second (Gbps): 176.0
Total System Ports:
48 Gigabit Ethernet +
4 x 10G
RJ-45 Ports:
48 x Gigabit Ethernet
Combo Ports (RJ45 + Small form-factor pluggable [SFP])
4 x SFP+
Packet Buffer: 3 MB
Unit dimensions (W x D x H):
445 x 350 x 44 mm (17.5 x 13.78 x 1.73 in)
Layer 3
IPv4 routing
Wirespeed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing
Wirespeed routing of IPv6 packets
Layer 3 Interface
Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface.
Classless Interdomain Routing (CIDR)
Support for classless interdomain routing
RIP v2
Support Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR)
Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server
Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options
DHCP relay at Layer 3
Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay
Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Quality of Service
Priority levels:
8 hardware queues
Scheduling:
Strict priority and Weighted Round-Robin (WRR)
Rate limiting:
Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing.
Congestion avoidance:
TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization
iSCSI traffic optimization:
A mechanism for giving priority to iSCSI traffic over other types of traffic
Green (power efficiency)
Energy Detect:
Automatically turn the power off on RJ-45 port when detecting the link down. Active mode is resumed without loss of any packets when the switch detects the link up.
Cable length detection:
Adjust the signal strength based on the cable length. Reduces power consumption for shorter cables.
EEE Compliant (802.3az):
Supports IEEE 802.3az on all copper Gigabit Ethernet ports
Disable port LEDs
LEDs can be manually turned off to save on energy.
Time-based port operations:
Link up or down based on user-defined schedule (when the port is administratively up).
Time-based PoE:
PoE power can be on or off based on user-defined schedule to save energy.
General
Jumbo frames:
Frame sizes are up to 9K bytes. The default MTU is 2K bytes.
MAC table:
16K addresses
Hardware
USB slot:
USB Type-A slot on the front panel of the switch for easy file and image management.
Buttons:
Reset button
Cabling type:
Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T
LEDs:
System, Link/Act, PoE, Speed
Flash:
256 MB
CPU
800 MHz ARM
DRAM
512 MB
Environmental
Storage temperature:
-13° to 158°F (-25° to 70°C)
Operating humidity:
10% to 90%, relative, noncondensing
Storage humidity:
10% to 90%, relative, noncondensing
Warranty:
Limited lifetime with next business day advance replacement (where available)
Package Content:
● Cisco Business 350 Series Managed Switch
● Power Cord (Power adapter for select 8-port and 16-port SKUs)
● Mounting Kit
● Quick Start Guide
Minimum Requirements:
● Web browser: Chrome, Firefox, Edge, Safari
● Category 5e Ethernet network cable
● TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed.